Are you using Lexmark inkjet printers? Was there ever a time that you have encountered printer error codes appearing on your PC’s screen? If you have such problems with your inkjet printers, you don’t need to worry. You can always make use of tips on how to fix these errors for your printer.

Most common Lexmark inkjet printer paper errors

There are various paper errors that may occur in your Lexmark inkjet printers. Here are some error codes to watch out for. Find out how you can solve them:

1. Error Code 22. This Lexmark inkjet printer error denotes paper jam or paper out. The solution is for you to check out for the paper in the tray. You must also check on the paper size and make sure that it is the same as the one set in your PC’s printing dialogue box.

2. Error Code 23. This is also known as paper jam. You should follow the same rules as those used for Error Code 22. In addition, you should exit the fuser’s sensor flag and sensor board.

3. Error Code 24. This is error on individual manual feed. This can indicate that you have manually fed the paper on the Lexmark inkjet printer paper tray when a paper is currently being pulled out of the gadget. You should not feed paper on the tray unless you are requested to do so.

4. Error Code 31. This error code signifies that you need to change paper. You must check paper size first to make sure that the one you have fed into the paper tray is the same as the one requested by the software. If there is a discrepancy, you need to reinstall the right paper size or adjust the paper size setting.

5. Error Code 35 and Error Code 36. These two denote paper error and load paper error respectively. Follow tips provide for Error Code 22. In addition, you must also take a look at recommendations for Error Code 23.

Other Lexmark inkjet printer error codes

Aside from the above mentioned error codes that indicate paper errors, other error codes that may arise if you own inkjet printers from Lexmark are the following:

1. Error Code 30. This is an indication that the Lexmark inkjet printer cover is open. First, you should make sure that the printer cartridge is installed correctly. Next, you need to switch the activator which is found hanging on the left portion of the printer’s top cover.

2. Error Code 40. This is more of a system board failure. When this error appears on your screen, you are requested to replace the system board.

3. Error Code 41. This can signify that your requested font is not available. Using the software or the font card, you must install the requested font before you try printing again. This can sometimes appear as Error Code 42.

4. Error Code 43. This denotes font card error and can be the same as Error Code 44. This can arise if you removed the font card while the printer is turned on. You need to reset the power source and check if there is a defective font card.

5. Error Code 45. This error indicates that there is a mistake in downloading the character font. You should check on the system software, set-up and board.

These are but just some few of the common problems associated with your use of Lexmark inkjet printers. Should you encounter any other problems that may arise in the future, you may contact the manufacturer for help. Lexmark inkjet printers are provided with corresponding support pages in the company’s website.

This Article is written by John C Arkin, contributor of PrintCountry News Articles.