Archive for the ‘Printer Ink Changing’ Category

3 Instructions on How to Refill a Printer Cartridge

Wednesday, February 17th, 2010

Are you worried about refilling your printer ink cartridge correctly? Is this your reason for asking help from an printer ink refilling station instead of just doing things on your own? While you may save time doing so, you also spend more.

The steps to refilling a printer cartridge are very simple. There is only one basic thing you need to bear in mind: FOLLOW INSTRUCTIONS. This can come with your purchase of a printer ink refill kit. To help ease your worries, here are basic things to follow in the entire process:

1.  Know your printer very well. If you have gone through the printer manual before you have even used your printer, you must have read instructions on how to refill your empty printer cartridges. Go over that section to have a review before you go on with the refill process.

2.  Remember that there are two different ways on how you can refill your empty printer cartridges. You need to use the printer ink reservoir (one that holds the printer ink) especially in refilling your HP ink cartridges. On the other hand, there are printer brands that make use of the sponge system particularly those of your Lexmark printers. The differences extend to instructions on how to refill a black ink cartridge and a colored one. You better focus on that as well.

3.  Perform the process slowly but surely. You should always consider the amount of ink that you will use in refilling the empty cartridge. More often than not, 5 cubic centimeters of ink will already be enough. While HP allows for the so called “room for mistake”, it is best not to use that room.

Above all this, remember to keep the refilling process for your printer ink cartridge clean. Avoid spillage and you will be able to keep your printer away from harm.

3 Things to Consider When Changing Printer Ink Cartridges

Wednesday, February 17th, 2010

Maximizing the use of your printers will depend on how you make use of your printer ink cartridges. Forming part of that is the way you change the printer cartridge. Just because you’re not encountering printing problems after you’ve changed your printer ink doesn’t mean you’re doing the entire thing correctly. So if you want to make sure you’re changing your ink cartridges right and you’re maximizing your printer’s usage, here are 3 things you should consider:

1.  There are differences from one printer model to another. Simply put, changing an ink cartridge for a Lexmark printer is entirely a different thing when it comes to a Dell printer and other printer brands. But of course, all printer cartridges are found inside the printer so you better check on that part where you can make the changes later on.

2.  Identify the colors that go with the printer. You have a wide array of colors to choose from. Aside from black, there is the cyan, yellow and magenta. These printer colors are separated inside the printer’s black box. Remove these ink cartridges using a lever but in some cases gentle wiggling of the printer will do.

3.  Always make sure you keep the process clean. Clean all residues that may be left by old ink inside your printer. This can result to clogging of printer ports thus affecting the printing capabilities of your new printer cartridge.

    Once you’ve taken note of these three things, you may now install your new printer ink cartridges. Make sure that you return the printer cartridge into its corresponding color slot. You will also need to reset the cartridges. It’s either you use the reset button that comes with your printer or turn the printer off for some time before trying to print with your new printer cartridge.

    Change Brother Printer Ink Cartridges in 5 Easy Steps

    Tuesday, February 16th, 2010

    Yes, changing the cartridge for your Brother printer is easy. This is because the printer warns you once the printer cartridge needs replacement. Want to know how you will be able to replace the ink cartridge successfully?

    1.  Start by checking your printer’s LCD panel. The LCD displays the message when your printer ink cartridge is empty. Always wait for this warning sign so you will not waste printer ink.
    2.  Once you find out which printer cartridge needs replacement, you should remove it using the release lever found inside your printer. Pull the lever carefully to unlock and remove the ink cartridge.
    3.  It is time to replace the empty printer cartridge. Make sure you have pulled out the protective yellow cap off the new printer cartridge. You should not touch its insertion slot as this can stain your skin.
    4.  Lock the new printer cartridge into the printer. Use the arrow located at the side of the printer ink in order to install the printer cartridge correctly. Once you have positioned the cartridge in the right spot, push its release lever. Wait for the “clicking” sound to ensure it is secured in its place.
    5.  Reset your printer’s ink dot counter. You will then be asked by the printer through its LCD screen if the cartridge is brand new. This is important so that it can reset the printer ink dot counter. You may press any of these three buttons for this process: the up navigation key; the number “1”; or the “+” sign.

      With all the steps mentioned above, you can change your Brother’s printer ink with a wide smile.

      3 Things to Bear in Mind When You Refill Your Dell Inkjet Cartridge

      Tuesday, February 16th, 2010

      What’s the first thing that comes to your mind when your Dell inkjet cartridge stops to work? Maybe, you’ll just end up throwing them away. But, haven’t you thought it wiser to refill the printer cartridge instead? Don’t be afraid to do this as there are only three things to consider in the entire process.

      1.  Think of why you need to refill the printer cartridge instead of throwing them away. You save money on printer ink and printer supplies. You also help save the environment from harm. Don’t ever think that refilling your printer cartridge will damage your printer or void your printer’s warranty.

      2.  Know the signs on when to refill your empty printer cartridges. Please don’t wait until they are empty. This can dry and eventually clog the printer nozzle. As an end result, your printer won’t work. When the “low ink” warning sign shows, refill the empty printer cartridge at once.

      3.  It is important to learn the refilling process. Be ready with your paper towels before you start this job. Make a small hole on the ink cartridge, particularly where the letter “e” in Dell is written. Use a 1/16 inch drill for this process.

      Use a syringe to transfer the printer ink slowly into the printer cartridge – about 10 to 15 ml will do. Insert the syringe and make sure it reaches the hard sponge inside the printer cartridge. Allow the printer ink to set overnight before placing it back inside the Dell printer. Remember to put a tape over the small hole to prevent ink from drying.

      Once you’ve kept all the above-mentioned tips in mind, you can refill your Dell printer ink with much ease. You can do ink refilling once or twice before you dispose your printer cartridge with Dell supplies.

        Search in Articles


      Why Shop at PrintCountry.com?